CMFH197116

CMFH197116Manufactured with a 24ga 304 Stainless Steel Lid, 3 4 inch 18ga Stainless Steel Mesh available in 5 different heights(8 inch,10 inch,12 inch,14 inch & 16 inch) & a 1. 5 inch wide Stainless Steel Swing Hinge.

The 1 inch non-foil faced insulation can be used in other applications such as filling around thimbles or fireplaces

5 inch x 18

CrossOver or HeavyWall) use an ID Coupler

5 inch x 7

WeatherTite Flexible Crown was designed for use over exterior masonry

Use for lateral support above tee then every 8 feet

304 Heavy Wall Liners are designed for wood burning applications and are manufactured with

Non-rotating inner hex rod prevents mirror head from swinging out of alignment

and are manufactured with Titanium Stainless Steel Tee Liner Kits (316) include: SmoothWall Stainless Steel Liner (316) TPCC - Square Lid Cap to fit the Flat Top Plate with Collar (24ga 304) TPC - Flat Top Plate with Collar 13x13 (24ga 304) TB - Tee Body (24ga 316) TS - 10 inch Long Tee Snout (24ga 316) TEC - Tee End Cap (24ga 316) Installation Instructions & Warranty Card

adj 2 inch-6 inch

It sits over the Top Plate preventing the Best-Flex Liner from slipping down

An insulated double wall design with stainless steel that is UL 103HT Listed for 2100 degrees continuous operation with 2 inch clearance to combustables