Victron MPPT WireBox-S 100-20 [SCC950140000]

Victron MPPT WireBox-S 100-20 [SCC950140000]The MPPT WireBox provides an extra level of safety, and is particularly useful if your MPPT Solar Charger is installed in a general access area. It covers all DC terminals, preventing accidental or inquisitive contact with terminal screws.

It can be used in a hot environment such as a machine room

an intelligent battery management algorithm can be chosen: see Battery Life

An internal temperature sensor is used to compensate the charge voltage with – 2 mV/ºC (– 1 mV/ºF) per cell

the Blue Smart IP65 Charger will attempt to recharge a deeply discharged battery by force-feeding it with a low current

If an automatic transfer switch is required we recommend using the MultiPlus inverter/charger instead

Maximum Output Current (10 S) at Nominal Output Voltage minus 20%: 15 A

full load efficiency exceeds 95%

The Centaur range of battery chargers features auto-ranging input covering 90-265VAC 50/60Hz input meaning they can be used anywhere in the world

Connection to the SmartShunt is made via a VE

Autotransformer - Split Phase 120/240V - 32AMP

The Victron VE

MultiPlus Compact 12/2000/80-150 120V VE