Victron Cable f/Smart BMS CL 12-100 to MultiPlus [ASS070200100]

Victron Cable f/Smart BMS CL 12-100 to MultiPlus [ASS070200100]Cable for Smart BMS CL 12 100 to MultiPlus This cable will allow the MultiPlus 500VA 1600VA, MultiPlus Compact 800VA 2kVA and MultiPlus II models to be used with BMS products that have no VE. Bus interface, such as the Smart BMS CL 12 100 and the small BMS. These MultiPlus models can be controlled from the Load Charge Disconnect outputs and Load Charger outputs respectively. The cable must be wired to the remote on off connector of the MultiPlus

Operating Temperature: -40degC to +60degC

Use wrench 75WR-2 or 75WR-3 for the hull nut

50 amp 125/250 volt female connector

UPC: 652480100734

enter the NavDoctor’s IP address and you can access the NavDoctor web interface

Cheek body: Aluminium Alloy

A low profile white ABS Cover

Addition of an NMEA 2000 adapter allows each GDT 43 transducer to share its data over the NMEA 2000 network to a compatible Garmin chartplotter or instrument display

Overall length (tip to tip) is 113/8 inches

used as a fall-back safety mechanism and also available as a remote controllable main systems switch

LED strobe light

UPC: 632085012182