Modified Gates Glidden #3

Modified Gates Glidden #3Gates Glidden bur with the tip cut off designed to create funnel shaped preparation in coronal to middle third of canal leading up to the separated file

The instrument is used (dry) to wedge into the space on the inside of the canal curve between the separated file and the canal wall

The Micro-trephine bur is used at 600 rpm in a counter-clockwise direction to encourage separated files to unthread from the canal as the trough is cut

Used in straight nosed handpiece at 5000RPM

Loop comes with two wires that can easily installed

creating a small space adjacent to the fractured file edge

Used in slow speed handpiece at 600 RPM

Micro lasso comprised of a tiny wire loop at the end of a stainless steel cannula with a black sliding retraction button that tightens the loop when pulled back away from the tip

Katana-V is ultrasonic tip with flat surface that should face towards the separated file

Used to sharpen the TFRK-S

ED89(TFRK-Katana H) tips usually cut only a quarter slot of the circle

The ultrasonic preparation continues until the broken instrument is “dancing” in the canal

The loop can be used to capture and retrieve a separated file segment