Hip Intermediate -40X

Hip Intermediate -40XThis six arm fitting serves as the hip junction fitting on a 40' wide traditional frame tent. This fitting sits at the half way point between the crown and the corner fitting and provides brace arms to connect support brace pipe to the hip area. It is designed for use on traditional west coast style frame tent systems that utilize 2. 0" round aluminum tubing with a 0. 125" wall thickness. The fitting is welded from precision cut 1. 25" Schedule 40

This three arm fitting serves as the end crown fitting for all rectangular

and (1) squaring card

The long end of this ratchet strap is sewn to a 1-1/2" diameter steel ring that allows it to be hooked over the tensioning nub on the baseplate

one to connect the four hip rafter pipes

50" x 7" x

The sections include a 7' Bottom section and a 5'6"' top section

It can be used on all widths of hip and gable ended traditional frame tents from 10' wide up to 40' wide by varying the length of brace pipe

Forged from 3/4" diameter high tensile alloy steel

This is the side fitting for the Festival CAN-W frame tent design

125" in diameter

The tip of the stake is forged with a pointed tip to assist in starting the driving process

The top pin is a friction fit and is installed by hand then hammering into final position with a rubber mallet or by simply tapping on the ground