L321 — PolyCore™ Long Lens Case 300 (w/ shoulder strap)

L321 — PolyCore™ Long Lens Case 300 (w/ shoulder strap)A robust shoulder style case for 300 2. 8 lens with a body attached and with the hood reversed. Also fits a 400 2. 8 & many 500 4 lens without a body attached and with the hood reversed. 41cm (16") I. D. Height This case was originally designed to carry a 300 2. 8 lens with a body attached, but with the subsequent introduction of the L311 you may find that case more suitable because of its more compact design. This case, however, will offer more

We recommend an aftermarket foot

Sony R5 etc

3mm closed-cell foam padding on bottom for protection of electronics against vibrations of road or trail

” (July 2011)

I bought a lens case from you because the Lowepro Lenscase 5 that the dealer threw in with my 400 DO didn't actually fit

it is often used in the flat mode

For a Nikon 300/2

The dividers are shorter than the overall height of the bag to increase accessibility (this is a VERY deep bag)

If you using a tandem or recumbent with a larger than typical tube size

Also consider the eoGEAR Saddle Nose Cover

A634-Z (called the “set” and comes with a B210 Basic Belt [unpadded])

is much too large for this bag