FOREDOM BALL BEARING FOR H.30, H.43T, H44T HANDPIECES

FOREDOM BALL BEARING FOR H.30, H.43T, H44T HANDPIECESWhich type bearing does your handpiece have? Our older handpieces have Press Fit type bearings that require replacement at our factory. In 2002, we started using Slip Fit bearings which allow the user to change them out. The ring pattern on any of our H. 30 and H. 44 handpieces identifies the type of bearings inside: 1. If your handpiece has 5 narrow rings at the front end and then thicker sets of 3 rings, 2 rings and 3 rings toward the back end, then

they will not slip

The measuring system is a non-contact linear CAP with LCD display and an auto-off system to save the battery

controlled

Three optical glass lenses are bonded together to form a compound lens which provides sharp very distinct magnified images

* Unit operates on 120V at 1500 Watts

PLU: JET-300

Melts at lower temperature (125° F)

Inlay waxes are most often used for the construction of dental crowns and bridgework

opposite the shaft end

8 inches (200mm)

To be used with dapping punches for shaping metals

Our new soldering pans rotate 360° with easy access