EDGE® #6 EXP Mini Collet Body Kit for 9 & 20 Series TIG Torches

EDGE® #6 EXP Mini Collet Body Kit for 9 & 20 Series TIG TorchesEDGE #6 EXP mini collet body kit for 9 and 20 Series TIG torches. Includes the following parts: Part# Description Quantity CB920 P6 EDGE #6 Collet Body Pyrex Cup 1 CB920 A Adapter 1 PYR20C18 1 8" Wedge Collet 1 13N29 1 8" Collet Body 1 13N10 #6 Alumina Cup 1 GL920 TS Heat Shield 1 200S Short Back Cap 1 CB920 OR Adapter O Ring 2 EDGE Welding Supply Pyrex Cup Recommendations: The EDGE adapter and EDGE cup must be fully seated onto the Teflon heat

Available for aluminum and hard wires

and the Max Dry XXL comes with 1-gallon (4-quarts) of desiccant

15' 1/0 ground clamp and cable assembly

Since aluminum Mig needs to be a spray transfer it is not as easy as “I will just turn the machine down” …

If screen replacement is needed make sure Screen is sealed against the walls of the cup or undesired results may occur

if we have your attention now

This foot pedal only works with the TIG function on the Pro Pulse™ 200

Filter kits are available for all stages of the air drying system

Not only is there an “old school” manual MIG program and a door chart for the few of us that are not ready to dive in headfirst

PLEASE NOTE: We do not accept returns on electrical parts

- Sensitivity control

035" diameter wire and