Grizzly T10895 - 3-Axis DRO for G8689 Mini Mill

Grizzly T10895 - 3-Axis DRO for G8689 Mini MillThis kit provides a 3 axis DRO (Digital Readout) to install on the model G8689 Mini Mill. The DRO can be toggled between inch and millimeter measurements, have a display resolution of 0. 0001" or 0. 001mm, and can be zeroed at any location. Installation requires basic drilling and tapping skills, and it takes approximately 12 hours, depending on experience level.

By selecting the right pressure washer and maintaining it like our livelihood depends on it

Inks and dyes

Rapidly cure fillers and coatings in three minutes or less with the REVO Handheld from Global Finishing Solutions® (GFS)

Service Parts PUSHROD PILOT VALVE

Eliminate Measuring & Guesswork

Usage: Base Coat

Moisture resistant and factory set to ensure accuracy for long life and reliability

5 Bore Dia mm 18 Stroke mm 7 Crankshaft ID Stamp 8 Inlet 1/2" F Outlet 3/8" F Max Temp 140° F Oil Capacity (oz) 15 Weight 23 RPM 3400 Shaft Size 1" Shaft Version V Shaft Type Solid

Abrasive Grit 100 Abrasive Material Aluminum oxide Backing material Cloth Sanding type Premium

Coolant capacity: 2-1/2 gallons

Motor gradually increases RPM

Dust collector is constructed of 14 Gauge steel