QU40348 Pinion Seal for 1999.5-2002 Dana 60, Dana 70 Rear Axles

QU40348 Pinion Seal for 1999.5-2002 Dana 60, Dana 70 Rear AxlesQU40348 Dana 60, Dana 70 Pinion Seal for some 1999 2002 Dana Model 60 and Model 70 rear axles (No flange). This 1st design, shallow shell pinion seal installs flush with the front of the housing. A band of sealant on the back face of the seal shell will contact the inner face of the seal bore when the seal is fully seated in the axle housing. This Seal is designed to work with QU40397 Wiper V Seal. Note: QU40348 is out of production and no longer

TMD01USB supsersedes TMD01CD 2001 Complete Dodge Factory Service Manual on CD

QU42072 Dually Adapter Set

the old seals can be easily removed with our QK4647 Seal Remover Tool Set or another suitable tool such as a length of sturdy pipe that will fit inside the axle tube and oil guide

you always risk cutting the seal lip on the sharp spindle threads as you start the hub on the spindle

1989-1993 Conversion Yoke for NP205 from Diesel W250

25" 14 Bolt Front Axle:

the first time a 2012-2018 Ram 2500

" Then the answer is an unqualified yes

Includes 2 each genuine AAM Wheel Bearings

Crud in dirty oil can quickly damage the small needle rollers that ride on the idler shaft

Lube the Thrust Washers with clean grease before assembly

QU40306 Axle Shaft Flange to Wheel Hub Bolt