Gauge Wheel Arm Repair Kit White 5000

Gauge Wheel Arm Repair Kit White 5000PR1250: GWA Repair Kit White 5000 The gauge wheel arm pivot is the #1 wear point on planters. This is caused by the fact that the ground load on the gauge wheel is offset from the center of the row where the arm contacts the adjustable stop. This offset load is supported by two points of contact between the pivot pin and the bore of the hub. These points wear and the arm starts to lean allowing the tire to pull away from the opener disk. Moving the

Some early 800/900 series planter arms may need to be altered to allow bracket to slide on

WHITE 6000 MUD SCRAPER SET

The closing wheel arm is Cast Steel or Steel which allows the ability to weld to

NUTRI MATE 3 ASSEMBLY UNIVERSAL LIQUID - RH Pin Adjust

you must also order 10 Rows 5011317L & 10 Rows of 5011317R

The design utilizes a disc spring to pre-load the outer end of the hub of the arm with enough spring pressure that the arm cannot lean but can pivot freely

1 ROW gets you 2 complete arms with hardware

White 6000 with Slots

MS4440: GW Mud Scraper Regular Profile- White 6000

causing sidewall lift and uneven seed depth

Price is per tailpiece (2 bearings

1700 (New) WITHOUT collar