(4) IAME KA100 Long Head Nut – Drilled for Tech Wire

(4) IAME KA100 Long Head Nut – Drilled for Tech WireThe IAME KA100 long cylinder head nut with tech wire hole is the drilled head nut required for series that mandate safety wire (tech wire) on the cylinder head. This longer nut features a through hole for threading safety wire, preventing the nut from backing off under vibration and satisfying post race technical inspection requirements. Many sanctioning bodies including SKUSA and USPKS require tech wire on specific engine fasteners for the KA100

Fitment: Universal — fits all kart chassis brands

and potential engine damage

keeping costs low and competition fair

Always press bearings in and out using proper tooling to avoid damaging the crankcase bores

Battery: Internal rechargeable lithium — 20 hours use

The KG 509 front panel mounts to the chassis using KG 509 upper and lower mounting brackets (sold separately) and pairs with the KG 509 front nose spoiler to complete the Nassau panel assembly

KG 508 Front Nose Spoiler — the front fairing component of the KG 508 Nassau panel system

or damaged float will cause incorrect fuel levels—either flooding the engine with too much fuel or starving it during high-demand situations

lean or rich running conditions

causing fuel starvation

Sizes Available: A0 through E1 (23 sizes)

This is the black connector version of the 10mm AiM water temperature sensor