QU40571U Used Dana 50IFS Right Differential Output Shaft

QU40571U Used Dana 50IFS Right Differential Output ShaftQU40571U Used Dana 50IFS Right Differential Output Shaft is a good used, genuine Dana diff output shaft for all 1983 to 1997 Ford F 250 and 1983 1985 Ford F 350 4x4 trucks equipped with the Dana 50 IFS Twin Traction Beam Front Axle. QU40571 was first used on later production 1983 Dana 50 Twin Traction Beam front axles and it was used until Dana 50IFS axles were phased out at the end of the 1997 model year. Note: Axle Shaft Snap Ring shown in image

61 and 70 1954-present

Ram 5500 4x4 trucks with New Process/New Venture NV271D manual shift or NV273D electric shift transfer cases

TK4943/TK4951/TK4958 Free Spin Kits for 2009 Dodge Ram

You may even find one in an early 1996 NV4500 transmission

Cartridge Seal Replaced Original Design

5-2002 Dodge Ram 2500 4x4 trucks with New Process NP241DLD

Worn clutch teeth can cause the transfer case to jump out of 4x4 under load

Tech Note 2: Bearing Removal Tools

QU20383U Good Used Axle Steering Arm with Trapezoid Bolt Pattern for 1967-1975 Ford F250 4x4 trucks with standard Dana 44 closed knuckle front axles

QU40238 Spindle Lock Washer is installed between the inner and outer QU40237 Spindle Nuts

F-350 Super Duty 4x4 DRW Trucks with Dana 80 Rear Axles: 2001

QU40906 3R Series 16 Spline Greaseable Slip Yoke with Press On Seal is made to fit GM and Dodge 3R series front or rear driveshafts that have had the original slip stub replaced by an aftermarket 1-3/8" diameter