077: HS-200-LV / 2x 15cm 8AWG

077: HS-200-LV / 2x 15cm 8AWG200A Current measurement sensor board, based on Allegro Hall Sensor ACS 250U. The voltage reading of the LiPo is optimized for up to 6S LiPo packs. This Sensor board needs a power supply. So please select the matching BEC according to your preference from the BEC section. The BEC will also power the flight controller as well as the attached equipment like GPS, telemetry etc. Connected to the sensor are 2x15cm AWG8 wire (red) as a standard. The board

with a total capacity of mAh / LiPo 1 plus mAh / LiPo 2

5mm / 17g (with 2x 10cm 12AWG)

1x 022: PL 4-14S HYB-BEC / 2x 5

2x Sensor cable / Molex 1

0V / 1x 12

42mm x 34mm x 10mm / 13g with enclosure and without cables

1 cable / 2x Clik-Mate-6p / L = 200mm

which can be screwed down to the main frame

60V) with transient spikes of max

if you need a different output voltage on output 2 or 3 -> Output 1 can't be changed and must remain 5

Since we monitor the current of both batteries

there is a reserve relay contact (alarm) for the user to implement any desired function