m16 X 1.75 Carbon Steel Hex Die

m16 X 1.75 Carbon Steel Hex DieProduct Description Carbon steel hex dies are for re threading or cleaning bruised or rusty threads. They are the most cost effective rethreading tool available. No special holder is required for this type of die, any wrench large enough will suffice. Ideal for maintenance in the shop or field. Brand Drill America Part Number DWTSMH16X1. 75 Size m16 x 1. 75 Material Carbon Steel Finish Uncoated (Bright) Size m16 Shape Hex

Adjustments are made by a fine pitch screw which forces the sides of the die apart

5 HRC for use on impact wrenches • Corrosion-Resistant – The socket is coated with a manganese phosphate finish to resist corrosion • Two Size Markings – The size is marked with a high-visibility laser marking and a permanent stamped marking that won't rub off • Friction Ring or Detent Pin Anvils – Smooth walls inside the drive end and a detent pin hole make the bit sockets compatible with both drive tool anvil types • Socket Rail – The twist-to-lock clips on the rail hold sockets securely and can be repositioned anywhere along the rail

Flute Length 13/32"

Part Number KFD3F37/64

Part Number: M20X90DPAPL

Part Number DWCA1610

Part Number D/A3F55/64

Color: Black

Part Number DULSB12

Part Number DWCT1106

The 4-degree swing arc reduces the length of travel at the end of the wrench handle between each click

The set includes 5/32 - 9/16 inch and 4 - 15 mm 6-point standard length sockets