(292) IAME KA100 Battery Support

(292) IAME KA100 Battery SupportThe IAME KA100 battery support is the mounting bracket tray that holds the 12V starter battery on the KA100 kart. This support mounts to the chassis and provides a stable platform for the battery, working in conjunction with the battery fixing belt (A 60904A) and battery clamp (A 60907A C) to keep the battery secure during racing. The battery support is typically mounted on the seat struts or chassis rail. Replace the support if it shows cracking,

If your LO206 is running lean or stumbling at high RPM

The IAME KA100 long cylinder head nut with tech wire hole is the drilled head nut required for series that mandate safety wire (tech wire) on the cylinder head

CMC Karting stocks Briggs 206 main jets and all other carburetor jetting components

Replace this gasket whenever the fuel pump section is disassembled for diaphragm replacement or carb service

This housing encloses the bendix drive assembly and provides the bearing surface and guide path for the bendix gear to slide in and out during engagement and disengagement with the engine ring gear

1 Digital output

intermittent connections

The KA100 uses one seal on each side of the crankshaft where it exits the crankcase

The carburetor bolts to the top of the spacer

which means more power reaching the ground

not an aftermarket substitute

or cracked housings over time from vibration and heat exposure