Schluter® KERDI-DRAIN FLANGE KIT PVC 2" OUTLET

Schluter® KERDI-DRAIN FLANGE KIT PVC 2" OUTLETThe most common KERDI DRAIN configuration for new residential shower builds a 2" PVC bonding flange with an integrated vertical outlet in a single assembly. This is what you use when you're building a new shower from scratch on a new PVC drain rough in. The fleece covered bonding flange is the core of Schluter's drain waterproofing system. Your KERDI or DITRA membrane overlaps directly onto this flange and bonds into the same thin set mortar layer.

Using the same loaded pad over and over is how you end up just smearing grime around

with subtle grain variation that keeps it from looking flat or monotone

Pro tip: The PS adhesive only works on concrete substrates — it won't bond properly to plywood

Pro Tip: Chevron patterns require careful planning

roll firmly with DITRA-ROLLER or screed trowel

Full fleece coverage is the goal

Installing over a wet slab with any adhesive is a recipe for bubbling and bond failure

and even traditional with the right furnishings

LED system runs on low voltage (24V DC) via a separate Schluter LIPROTEC driver — safe for wet locations

Test cable resistance with a multimeter BEFORE

Includes connectors

head-turningly shine — Shinekeeper is the Armstrong product that delivers it