Greek Key Stencil - Art Decor Border

Greek Key Stencil - Art Decor BorderUsing laser cut Mylar film and paint, it is very easy even for the beginner, to produce stencil work of HIGH QUALITY on Furniture, Walls, Floors, Fabrics, Windows and almost any other flat or lightly curved surfaces. If you haven't got the stamina for a whole wall a combination of similar stencils can add a bright splash of color. Large stencils make a stunning accent on an empty wall, try them near a sofa or table or even by the skirting board of

Always make sure that the surface to be stencilled is clean and properly prepared with no flaking paint

but the two most popular types are Acrylic and Dry-brush Oil

After application please leave to dry for 24 hours before washing

especially when changing color

Apply the paint using an up and down stippling motion

Place the Rhinestones on the glue with the Applicator Wand and leave to set for 3 hours before removing stencil

Gem Tac) onto the fabric through the holes about 10 - 20 at a time

Place stencil on garment and use sticky tape to keep stencil from moving

Virtually any paint can be used to stencil with but the two most popular types are Acrylic and Dry-brush Oil

Starting in the center of the sheet and push outwards with a cloth ball or fingers to eliminate wrinkles and bubbles

Place stencil on garment and use sticky tape or low tack spray glue to keep stencil from moving

The traditional technique used 30 to 40 layers of varnish which were sanded to a polished finish