ABC Switch with Three Outputs

ABC Switch with Three OutputsThis is an ABC switch which lets you have one of three outputs routing the signal from the input. Great when you have three amps that you use with the same guitar, no more cable switching! This is a smart little pedal in a small package. The first switch selects either the A or B output, and the second switch activates C overriding whichever output is selected on the first switch. The pedal is totally passive. If you need to power the LEDs the pedal

The LED can be powered by an internal 9v battery (not supplied) and/or via a 2

the nut colour and also add the socket names using the above options

The first switch (A/B) lets you select either loop A or B

Size: 30mm(H)x40mm(W)x70mm(D)

and this one has the additional benefit of having soft touch switch so you don't hear that "click click click" just as you are setting the tempo

The 2 gang patchbox has a side to side socket layout and is totally passive so no power required

Size: 30mm(H)x170mm(W)x100mm(D)

This is a latching footswitch

You will need a mono cable to connect the pedal to your amp

Please note the stereo version uses a footswitch with a mechanical click

Size: 30mm(H)x60mm(W)x110mm(D)

You'll need a two stereo patch cables to connect the footswitch to your pedals