Adafruit PiTFT 2.4\" HAT Mini Kit - 320x240 TFT Touchscreen

Adafruit PiTFT 2.4\" HAT Mini Kit - 320x240 TFT TouchscreenIs this not the cutest little display for the Raspberry Pi? It features a 2. 4" display with 320x240 16 bit color pixels and a resistive touch overlay. The HAT uses the high speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video etc. Best of all it plugs right in on top! It's designed to fit nicely onto the Pi Model Zero, A+, B+, Pi 2, Pi 3 any Pi with a 2x20 connector. This design uses the

3V they draw about 5mA so you can put up to 4 or 5 in parallel on a single microcontroller pin

the SMA port may underperform over time and exhibit undesired attenuation

Note: As of Tuesday

Accuracy of 200 PPM

This cable will also work with anything that has a MicroUSB port

M32W and Arduino Yun software

is integrated to provide motion detect feature

0mm pitch connectors

Runs for about 8 hours continuously on two CR2032s

remarkable changes are taken to improve the flexibility and user experience

or 3xAAA or 3xAA battery pack

Operation temperature:-40°C to +85 °C