Headset 257 / AC / URS / RMX AL

Headset 257 / AC / URS / RMX AL

Contient : - Spacers 5mm - qty 2 - Spacers 10mm - qty 2 - Spacers 20mm - qty 2 - Spacers 40mm - qty 2 - Screws M6x25mm (for 0mm stack) - qty 4 - Screws M6x30mm (for 5mm stack) - qty 4 - Screws M6x35mm (for 10mm stack) - qty 4 - Screws M6x40mm (for 15mm stack) - qty 4 - Screws M6x45mm (for 20mm stack) - qty 4 - Screws M6x50mm (for 25mm stack) - qty 4 - Screws M6x55mm (for 30mm stack) - qty 4 - Screws M6x60mm (for 35mm stack) - qty 4 - Screws M6x65mm (for 40mm stack) - qty 4 - Screws M6x70mm (for 45mm stack) - qty 4 - Screws M6x75mm (for 50mm stack) - qty 4 - Screws M6x80mm (for 55mm stack) - qty 4 - Screws M6x85mm (for 60mm stack) - qty 4 - Screws M6x90mm (for 65mm stack) - qty 4 - Screws M6x95mm (for 70mm stack) - qty 4 - Washers (ID 6

please refer to the BMC ICS Guide

-8° in ICS configuration - Lengths available: 70mm

alloy compression ring

Tops are comfortable with their unique oval section

please refer to our "MTT suspension quick setup guide" available on our website

25mm - qty 1 - Inter-bearing spacer Ø18

3 bolts and the rubber cover

Compatible with optional computer mount available (Garmin/Wahoo/GoPro)

5mm axle length) | Thru axle rear CTC0013 (154mm axle length)

0 (Ø12mm head) - qty 3 - C-Shaped Retaining Ring (for Hole) RTW-22 - qty 3 - Alloy Bolt - Upper Link M6x26

Using a standard bar/stem system and allows for easy stack and reach adjustment