4.0" Alum CP Top Section 9'0"

4.0" Alum CP Top Section 9'0"This 4" OD aluminum section is the top pole section of the 2pc and 3pc 4. 0" OD poles. This is only the top 9' section of the pole. The top section of the pole is fitted with a zinc plated steel top pin. The top pin is a welded steel assembly with a 0. 847"OD pole pin measuring 12" in length that is capped with a black low density polyethylene end plug. Specifications: Base Material: 4" OD 6061 T6 Structural Aluminum Tube, ID 3. 750", OD 4. 000", and

This ballasting plate is designed to capture the uplift and lateral forces on most Aztec Tents products and integrate with common industry cement block dimensions

NOTE: These drapes do not have a relief or cutout to accommodate a leg brace

Tectrac LK

Base Material: Welded Steel

securing equipment on a pallet

This is a rafter intermediate eave fitting for the 50x Jumbotrac hip ended frame tent design

Use only in a well ventilated area with proper protective equipment

Artwork specification guidelines can be found HERE

This is the corner fitting for the Festival CAN-T frame tent design

The JT Keder Feeder is a 2pc feeder set to aid in the feeding of keder material into the frame of the Jumbotrac and Jumbotrac Lite frame tent systems

This rope is commonly used for tie-down applications for lighter duty applications

5" OD aluminum tubing is commonly used as a perimeter tubing for the Festival CAN-W frame tent system and also for both leg and perimeter tubing for the Festival CAN-T frame tent system