E584 — XX-Large Lens Pouch I

E584 — XX-Large Lens Pouch IFor a Nikon 300 2. 8 or 200 500 5. 6 with the hood & leatherette cap in the storage position. This lens pouch is a lightweight alternative to our Long Lens Cases, which are designed to hold a lens and a body together. This case is lined with 10mm closed cell foam. The bottom has a tough 12mm PolyCore insert, which is same material used in the side walls of our PolyCore long lens cases. The E584 is for a Nikon 300 2. 8 lens with the with the hood in

The length of padded portion of the harness is 36cm (14")

Lined with a light 4mm open cell foam for protection

Slip the corners of the plastic under the webbing flaps

the optional Y309 strap kit is recommended to prevent the top of the case from pulling away from the belt

Top Opening* = 15d x 18w cm

Our normal harness utilizes a three-point suspension system (two in front and one rear)

Our standard padded belt & most popular model

roughly six times around the earth

Constructed with 6mm (1/4") closed-cell foam throughout

8 bag with the “L” style brackets

but without a camera body attached (Sept

Constructed of two 38mm (1-1/2") wide nylon webbing